Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Port Richmond Homeowners
Port Richmond’s rowhouses have chimneys that have been through a lot: decades of freeze-thaw winters, driving rain off the river, and mortar joints that quietly crumble behind a parged face. When a sweep tells you something is wrong, the worst outcome is being told you need a rebuild you can’t verify. We don’t work that way. Our technicians have up to 12 years of experience, and every repair starts with photographic evidence you can look at yourself. We handle the full chimney system – from the firebox to the crown – so the sweep, the repair, and the rebuild all come from one company. Same-day repair is often possible in Port Richmond, and the price is set per job by a written estimate before any work begins. Call (833) 754-6815 to book.
What Our Chimney Repair Service Includes
Chimney damage rarely stays in one place. A cracked crown lets water into the masonry, the brick face spalls, the flashing pulls away, and suddenly a small repair has become a large one. That’s why we look at the whole assembly rather than the one spot that looks bad.
Mortar Repointing
Repointing is grinding out failed mortar between bricks and packing in fresh mortar matched to the existing joint. You need it when joints have receded, turned sandy, or show hairline cracks that let water in. We match mortar color and hardness to the original so the repair doesn’t stand out or damage the softer brick around it.

Spalling Brick Repair
Spalling is when a brick face flakes or pops off, usually after trapped moisture freezes and expands inside it. You’ll see brick dust on the roof or a pitted, cratered face on the chimney stack. We cut out the failed units and replace them with brick that fits the original color and size, then address the moisture source so the new brick doesn’t fail the same way.

Chimney Waterproofing
Waterproofing is a breathable sealer applied to the exterior masonry that keeps rain out while letting moisture vapor escape from inside. It’s the right call when your brick is sound but takes on water every storm, or right after a repair to protect fresh work. We use a vapor-permeable product, not a film-forming sealant that traps water and makes spalling worse.

Flashing Repair
Flashing is the metal that seals the joint where the chimney meets the roof, and it’s one of the most common places for leaks to start. You’ll notice it as water stains on the ceiling near the chimney or rust streaks down the masonry. We reset or replace the flashing and counter-flashing and seal the roof joint properly, which is the fix a roofer and a chimney company often argue about who should do.
Chimney Rebuilding
A rebuild is removing the damaged portion of the stack – often the top few courses above the roofline – and rebuilding it with new brick and mortar. It makes sense when the top of the chimney has lost too much material for patches to hold. We rebuild from the roofline up, keep the original footprint, and cap it with a proper crown so the new work lasts.
Tuckpointing
Tuckpointing is a finer version of repointing where a contrasting mortar is worked into a shaped joint for a cleaner, more defined look. It’s common on older Port Richmond facades where the brickwork is a feature, not just a wall. We use it where appearance matters and the masonry is otherwise sound, and we’re honest when repointing is the more sensible choice.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Repair
When a chimney needs a new liner or a cap, the material matters as much as the labor. We install and repair DuraFlex flexible liner systems, which is what lets us handle older and non-standard flue configurations that rigid-liner-only crews turn away. We also apply HeatShield, a liner restoration product that resets a deteriorating flue from the inside without a full tear-out – often the difference between a repair and a rebuild.
For caps and crowns, we work with purpose-engineered products from Gelco, Olympia Chimney, and Famco rather than improvised hardware-store covers, so the cap actually fits the flue and vents correctly. On the masonry side we use Copperfield materials where they suit the job. We service equipment from all of these makers and know where each one tends to wear out. Whether you have a HeatShield-restored flue, a Gelco or Famco cap, an Olympia Chimney liner, or any other make, we can help.
Signs You Need Chimney Repair Right Now
- Crumbling or receding mortar joints. If the mortar between the bricks has turned sandy or pulled back more than a little, water is getting in. It’s a repointing job now and a rebuild later if you leave it.
- Brick flakes or dust on the roof. Spalling brick means moisture is freezing inside the masonry. The dust is the surface of your chimney breaking off a little at a time.
- Water stains on the ceiling or near the chimney. A dark ring or damp patch points to a flashing or crown leak. Left alone, the water reaches the framing, not just the masonry.
- A loose or missing chimney cap. A cap that’s blown off or rusted through lets rain straight down the flue. That’s a cheap fix that protects everything below it.
- White chalky staining on the brick. That white bloom is efflorescence, a sign moisture is moving through the masonry. It’s a symptom worth diagnosing before it becomes structural.
Our Chimney Repair Process – Step by Step
- 1
Inspection with camera and photos. We look at the flue from the inside with a camera and at the masonry from the outside, and we photograph everything we find. You see the same images we do, so nothing is a mystery.
- 2
Written findings and a flat estimate. We explain what’s damaged, what’s cosmetic, and what can safely wait. Then we give you a flat price per job, in writing, before any work begins.
- 3
Agree the scope, then book the sweep. You decide what to fix. If the job involves a repair plus a sweep, we handle both, so there’s no handoff to a second contractor.
- 4
Do the work with professional-grade materials. Repointing, brick replacement, waterproofing, flashing, caps, liners, and rebuilds all use materials from brands we trust – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – not whatever’s cheapest at the supply house.
- 5
Final check and photo report. We test the flue, confirm the repair is sound, and leave you with a photo record of the finished work and a satisfaction guarantee.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Port Richmond?
Chimney repair in Port Richmond typically runs from a few hundred dollars for small masonry work up to several thousand for a rebuild, depending on how much of the stack has failed. These are typical estimates only – the written estimate sets the final price.
| Repair | Typical Estimated Range | What Drives the Price |
|---|---|---|
| Mortar repointing | $300 – $900 | Linear feet of joint, height, and access |
| Tuckpointing | $400 – $1,000 | Detail level and brick condition |
| Spalling brick repair | $350 – $1,200 | Number of units replaced and matching |
| Chimney waterproofing | $250 – $600 | Masonry square footage |
| Flashing repair | $300 – $800 | Roof pitch and whether the metal is reset or replaced |
| Chimney rebuild (roofline up) | $2,000 – $6,000 | Height, brick count, and crown work |
What affects the price: how high the chimney rises, how much of the stack is damaged, and whether the repair is above or below the roofline. You avoid overpaying by getting the diagnosis in photos and asking what can safely wait. A free estimate includes the inspection, the written findings, and a flat price – no obligation to book.
Chimney Repair Near Port Richmond – Our Service Area
We cover Port Richmond and the neighborhoods around it, including Kensington, Fishtown, Frankford, Hunting Park, Northern Liberties, Olney, Logan, Fairmount, Tacony, Oxford Circle, and East Falls. Response times depend on where you are in that spread and how booked the schedule is. When a neighbor needs chimney repair, or someone in Fishtown needs chimney repair, we can usually get out the same day. For the full range of work, see our Chimney Sweep Port Richmond page, and for the parent service, our chimney repair page.
Serving Port Richmond, PA – Our Local Coverage Area
We serve Port Richmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Repair in Port Richmond
Chimney repair is fixing the parts of the chimney system that have failed: mortar joints, brick faces, the crown, the flashing, the cap, or the flue liner. It’s different from a sweep, which removes creosote and keeps the flue clear. Most chimneys need both eventually, and we handle them together so you’re not coordinating two contractors. Call (833) 754-6815 for an exact quote – estimates are free.
Most repairs take a day or less – repointing, waterproofing, and flashing work are single-visit jobs. A rebuild takes longer, usually several days depending on height and access. We tell you the expected timeline in the estimate so you can plan around it. Call (833) 754-6815 to book a free estimate.
Typical estimates range from about $300 for small repointing work up to $6,000 for a full rebuild, with most repairs landing in the $300 – $1,200 range. The written estimate is what sets the final price, and the estimate itself is free. Call (833) 754-6815 for an exact quote.
Yes. We install and repair DuraFlex flexible liner systems and apply HeatShield liner restoration, which lets us fix a deteriorating flue without a full tear-out. We also work with Gelco, Olympia Chimney, and Famco caps and components. Whether you have one of these or any other make, we can help – call (833) 754-6815.
Same-day repair is often possible across Port Richmond and the surrounding neighborhoods, though we don’t promise it before we’ve seen the job. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Workmanship carries a satisfaction guarantee, and the materials we install carry the manufacturer’s product warranty – which is one reason we use professional-grade brands like HeatShield and DuraFlex rather than generic supplies. We explain exactly what’s covered on your specific job before you commit. Call (833) 754-6815 for details on your repair.
Clear the area around the fireplace and make sure we can get to the roof access point. If you have pets, keep them away from the work area. Beyond that, there’s not much you need to do – we bring the equipment, the camera, and the materials, and we’re happy to walk you through what we’re doing as we go.
Schedule Your Chimney Repair Service in Port Richmond Today
Don’t let a small mortar problem turn into a rebuild. We handle the sweep, the repair, and the rebuild as one company, with photos you can see for yourself and a flat price agreed before we start. The estimate is free and there’s no obligation. Call (833) 754-6815. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Port Richmond.