Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Liner & Rebuild Across Olney
If you own a rowhouse or twin in Olney, your chimney is probably older than almost anything else in the house, and it may not be venting what you think it’s venting. We handle the full chimney system for Olney homeowners, from the firebox to the crown, with liner replacement, partial rebuilds, and liner repair done by technicians who understand how these pre-war stacks actually work. That matters here more than in most neighborhoods, because Olney’s party-wall flues serve attached homes and boiler systems as often as they serve fireplaces. Call (833) 754-6815 to book an inspection. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Olney Homeowners Call Chimney Sweep Port Richmond for Chimney Liner & Rebuild
Olney is a neighborhood of tightly packed brick, and the chimney problems here are brick problems first and fireplace problems second. We spend a lot of time in Olney explaining to homeowners that the flue they think belongs to their fireplace may actually be the one venting their gas boiler, or the neighbor’s. Getting that identification right is the difference between a real repair and an expensive mistake, and it’s where our liners and rebuild work begins.
Our technicians have up to 12 years of experience working on exactly this kind of housing stock: two and three-story rowhouses and twins with clay-tile flues and exposed brick stacks on the party wall. We show you what the camera sees before we recommend anything. Nothing gets sold on a hunch, and nothing gets recommended without evidence you can look at yourself.
We keep professional-grade materials in the mix, including DuraFlex flexible liner systems for flues with bends and offsets that rigid liners can’t handle, and HeatShield for liner restoration when the existing flue still has good bones. One company handles the sweep, the liner, and the rebuild. No handoffs, no second contractor guessing at what the first one found.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Liner & Rebuild Services in Olney
Liner Replacement in Olney
Most original clay tiles in Olney’s early-20th-century rowhouses are cracked, spalling, or simply not sized for the appliance now using them. A replacement stainless liner gives the flue a continuous, correctly sized path from the appliance to the top. We trace the stack first, confirm which unit it serves, then size the liner to what’s actually venting into it, whether that’s a gas boiler, a water heater, or a fireplace.
Partial Rebuild for Olney Chimneys
A partial rebuild addresses the part of the stack above the roofline: the crown, the flashing, the top courses of brick, and the mortar joints that water has been working on for decades. Philadelphia’s humid summers and freeze-thaw winters punish old mortar, and spalling at the crown is usually the first sign. Fixing that section before it spreads is often the difference between a few hundred dollars and a full tear-out.
Liner Repair in Olney
Not every damaged flue needs a new liner. When the tile is cracked but the surrounding structure is sound, HeatShield liner restoration can resurface the interior and extend the life of what’s already there without demolition. It’s a good fit for Olney stacks where the mortar is holding and the problem is isolated. We’ll tell you plainly when repair will hold and when it won’t.
Flexible Liner Systems in Olney
Older Olney flues often have offsets, twists, or irregular cross-sections that a rigid liner can’t follow. DuraFlex flexible liner systems let us line those configurations instead of writing them off as unlineable. That opens up options for rowhouses where the flue path isn’t straight, which is more common here than you might expect.
Trusted Brands We Service in Olney
We work with professional-grade chimney materials, and the brands matter because they carry product warranties and traceable material specs that generic supply-house stock doesn’t. DuraFlex handles flexible liner work. HeatShield covers liner restoration. Copperfield and Famco round out our liner and cap options. That’s the difference between a company that sweeps and leaves and one that can actually fix what it finds. If a liner or rebuild recommendation comes with a brand name attached, you can look up the product yourself before you decide.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Liner & Rebuild Problems We See in Olney Homes
Here’s where the industry’s worst upselling happens, so we’ll be direct about the failure modes and how we handle each one.
- Relining or cleaning the wrong party-wall flue. A flue that looks like it serves one rowhouse can actually vent the attached neighbor’s boiler. Misidentifying the stack during a cleaning or relining job leaves the adjacent unit venting into a compromised flue, which is the classic Olney mistake.
- Sizing a liner to a fireplace when the flue serves a boiler. In much of 19120, the flue behind the fireplace was converted decades ago to serve a gas-fired boiler or water heater. A stainless or flexible liner sized for wood is the wrong liner for that appliance, and the fix starts with confirming what’s actually venting.
- Recommending a full rebuild for a cracked tile that a liner repair could resolve. Spalling mortar and cracked tile aren’t the same problem, and they don’t have the same solution. HeatShield or a targeted liner repair can often resolve the first without the cost of a rebuild.
- Lining over spalled mortar that needs repointing first. The reverse mistake is just as costly: installing a liner into a stack whose mortar joints are already failing traps the problem behind a new liner. Repointing comes first, then the liner goes in.
Pricing for Chimney Liner & Rebuild in Olney, PA
Here’s what liner and rebuild work typically runs in Olney’s market. These are estimated ranges, and the written estimate you get after the inspection sets the final price.
| Service | Typical Olney range |
|---|---|
| Stainless steel liner (per flue, sized to appliance) | $1,800 – $4,200 |
| Flexible liner for an offset or irregular flue | $2,200 – $4,800 |
| HeatShield liner restoration | $1,400 – $3,200 |
| Liner repair (targeted, no replacement) | $450 – $1,200 |
| Partial rebuild (crown, flashing, top courses) | $2,500 – $7,500 |
| Full chimney rebuild | $8,000 – $20,000 |
What moves the number: the height and accessibility of the stack, whether the flue has offsets, whether repointing is needed before lining, and whether the crown and flashing need rebuilding. Our estimates are free, and we don’t recommend a rebuild unless the camera shows you why it’s needed.
We Also Serve Cities Near Olney
Our chimney liner & rebuild work covers Olney and the surrounding neighborhoods, including Logan, Oak Lane, Hunting Park, and Frankford. The housing stock is similar across these areas, so the same approach applies: identify the stack, run the camera, show you what’s there. Call (833) 754-6815 to book.
Serving Olney, PA – Our Local Coverage Area
We serve Olney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Liner & Rebuild in Olney
Yes, and it may need one more urgently than a fireplace flue would. A gas boiler vented into an undersized or cracked clay-tile flue can leak combustion gases, and in a tightly sealed rowhouse those gases have nowhere to go but into the living space. We size the liner to the appliance and confirm the flue is correct before installing. Call (833) 754-6815 for an exact quote.
Ask them to show you the trace before any work starts. On a party-wall chimney, the technician should run a camera down the flue and confirm on screen which appliance it serves before cleaning or lining. If they can’t demonstrate that, don’t let them proceed. We walk you through the camera feed so you see the same thing we do.
Spalling means water has been getting into the brick and mortar and freezing, and the surface is flaking away. Whether it means a partial rebuild or a full one depends on how far the damage has spread. We inspect the crown and flashing first, since water intrusion usually starts there, and recommend the smallest repair that will actually hold. Call (833) 754-6815 to book an inspection.
Yes. A sealed fireplace doesn’t mean the flue is out of service; it often means the flue was repurposed for a boiler or water heater. A Level 2 inspection with camera is the only way to confirm what’s venting where, and it’s the first step before any liner or rebuild recommendation.
You should see the evidence. A cracked tile, a gap in a joint, a misaligned stack connection: all of that shows up on camera, and we show it to you before quoting anything. Our estimates are free, the written estimate sets the price, and we’ll tell you when work can safely wait. Call (833) 754-6815 with questions before you commit to anything.
Written by the team at Chimney Sweep Port Richmond.