Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Fireplace Repair for Port Richmond Homeowners
When a fireplace stops drawing, smells of smoke, or won’t light at all, the fix is rarely a single part. It’s usually a system issue, from a cracked firebox to a stuck damper to a pilot that won’t hold. That’s the work we do. Our technicians have up to 12 years of experience diagnosing and repairing fireplaces, and we handle everything from the firebox to the crown. We know Port Richmond’s older rowhouses and the masonry and venting quirks that come with them. If you’re in Port Richmond and your fireplace isn’t acting right, call (833) 754-6815. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the written estimate sets the final price.
What Our Fireplace Repair Service Includes
We repair every component of the fireplace and its surrounding chimney system. One call covers the whole job, and you don’t get handed off to another contractor.
Gas Fireplace Repair
Gas units fail in specific ways: burners clog, thermocouples wear out, and venting can work loose over time. When the flame is weak, uneven, or the unit won’t stay lit, the problem is usually in the burner assembly or the safety controls. We diagnose the gas side and the venting together, because a gas fireplace that looks fine can still be venting incorrectly. We repair the burner, controls, and venting as a system rather than swapping one part and hoping.
Wood Burning Fireplace Repair
Wood fireplaces take a lot of abuse. A firebox that’s spalled or cracked, a damper that no longer seats, or smoke that rolls into the room instead of going up the flue all point to repair work that goes beyond a cleaning. We inspect the firebox, damper, smoke chamber, and flue for the actual cause, then repair the masonry or metal that’s failing. A wood fireplace that smokes back means it isn’t drafting correctly, and that needs to be fixed before the next fire.
Fireplace Insert Service
Inserts sit inside an existing firebox and depend on a proper connection to the flue. When an insert is hard to start, burns dirty, or the blower keeps cutting out, the issue is often the liner connection or the surround seal. We service gas, wood, and pellet inserts, check the flue connection, and repair or replace the liner run where it’s failed. Olympia Chimney components come into play on insert liner installs, and they hold up well in the tight clearances inserts demand.
Damper Repair
The damper is the metal door at the top of the firebox that controls the draft. A damper that’s rusted open wastes heat up the flue; one stuck shut lets smoke into the room. We free stuck dampers, replace rusted or warped ones, and check the frame for the corrosion that causes repeat failures. A damper that won’t seat is a draft problem and a heat-loss problem at the same time.
Firebox Repair
The firebox is the chamber where the fire actually burns, and it takes the most heat. Cracked firebrick, crumbling mortar joints, and spalled masonry are the usual signs it needs attention. We repair firebox masonry and can rebuild the firebox itself when the damage is deep enough that patching won’t hold. Cracks in the firebox are the path heat uses to reach the framing behind it, so this is repair work that shouldn’t be put off.
Pilot Light Repair
Gas fireplaces with a standing pilot rely on a small flame to light the main burner. A pilot that won’t stay lit usually means a dirty orifice, a failing thermocouple, or a draft that keeps blowing it out. We clean and adjust the pilot assembly and replace the thermocouple or thermopile where it’s weak. If the pilot goes out repeatedly, we look at the venting too, since a downdraft can be the real cause.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Fireplace Repair
We work with professional-grade brands that chimney specialists rely on. HeatShield is the liner restoration system we use when the flue has deteriorated and you want to extend its life without a full tear-out. Gelco supplies the caps we install, purpose-engineered pieces rather than improvised hardware-store covers. Famco is another cap line we use where the fit calls for it. Olympia Chimney components go into many of the insert and liner connections we repair, and DuraFlex flexible liner systems let us handle flue configurations that rigid-liner-only crews turn down.
Each brand wears out in its own way, and knowing where helps us find the fault faster. Whether you have equipment from HeatShield, Gelco, Olympia Chimney, Famco, or any other make, we can help. If you’re not sure what you have, we’ll identify it during the inspection. Professional-grade materials carry product warranties that generic parts don’t, and we rely on that when we choose what goes into your repair.
Signs You Need Fireplace Repair Right Now
Some symptoms are cosmetic. Others mean you shouldn’t use the fireplace until it’s inspected. Here’s what to watch for in Port Richmond homes.
- Smoke rolling into the room. A fireplace that smokes back isn’t drafting correctly, which usually points to a blocked flue, a stuck damper, or a firebox that’s pulled away from the smoke chamber. Don’t light another fire until the draft is checked.
- Cracked or crumbling firebrick. Small cracks in the firebox are common; gaps and missing mortar are not. Heat passes through those openings, and that’s a problem worth fixing before the next burn.
- A damper that won’t move. If the handle is stiff, stuck open, or won’t close at all, the damper is failing. That means heat lost up the flue all winter or smoke back into the room all evening.
- Pilot light that won’t stay lit. Repeated pilot failure on a gas unit usually means a worn thermocouple or thermopile, or a venting problem causing a draft. Both affect how safely the unit runs.
- Strong smell when the fireplace isn’t in use. A cold fireplace that smells of smoke or gas means the draft is reversed or something is leaking. Stop using it and have it inspected.
We inspect with a camera and show you the evidence before we recommend anything. If a repair can wait, we say so. Call (833) 754-6815 to book an inspection.
Our Fireplace Repair Process – Step by Step
- 1
Book the visit and confirm the scope. We ask what the fireplace is doing so we can plan the right tools. The sweep or inspection is booked into a slot that suits you, and dispatch runs Sunday through Friday, 7am to 7pm. The flat price for the inspection is agreed before we arrive.
- 2
Inspect the whole system. We don’t just look at the part you mentioned. We check the firebox, damper, smoke chamber, flue, cap, and crown, because the symptom and the cause aren’t always in the same place.
- 3
Run a camera inspection. A camera gives us a clear view up the flue and into the smoke chamber, spots hidden cracks, and shows the condition of the liner. You see the footage and photos too, so the recommendation isn’t something you have to take on faith.
- 4
Write the estimate and show you the evidence. We explain what’s failing, how urgent it is, and what the repair costs. Nothing gets recommended without camera evidence you can see. If a piece of work can wait until spring, we tell you that plainly.
- 5
Do the repair and confirm the draft. Once you approve the estimate, we carry out the repair and check the draft and clearances before we finish. You get a photo report of the work and the fireplace back in working order.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Repair Cost in Port Richmond?
Most fireplace repairs in Port Richmond run within predictable ranges depending on what’s failed. For a typical job:
| Repair | Typical estimated cost |
|---|---|
| Pilot light or thermocouple repair | $150 – $350 |
| Damper repair or replacement | $250 – $600 |
| Firebox repair (masonry patch) | $400 – $1,200 |
| Gas fireplace burner or control repair | $250 – $700 |
| Fireplace insert service and liner connection | $350 – $900 |
| Firebox rebuild or liner restoration | $1,500 – $4,500 |
What affects the price is the extent of the damage, the age and construction of the fireplace, whether the liner needs work at the same time, and whether the repair needs a partial rebuild. The biggest cost risk is paying for a repair that wasn’t necessary. Our camera inspection and photo report means you see the evidence yourself, and if a repair can be safely delayed, we tell you. A free estimate includes the inspection, the camera run where needed, and a written price before any work begins. The written estimate sets the final price, so there are no surprises when the repair is done. Call (833) 754-6815 for an exact quote.
Fireplace Repair Near Port Richmond – Our Service Area
We work across Port Richmond and the surrounding neighborhoods, including Kensington, Fishtown, Frankford, Hunting Park, Northern Liberties, Olney, Logan, Fairmount, Tacony, Oxford Circle, and East Falls. Every one of these is a short drive from Port Richmond, so a repair visit is easy to fit around your day. We book a visit and handle it as a single coordinated job, dispatch runs 7am to 7pm Sunday through Friday. Call (833) 754-6815 to schedule.
Serving Port Richmond, PA – Our Local Coverage Area
We serve Port Richmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fireplace Repair in Port Richmond
Fireplace repair means fixing the parts of a fireplace and its chimney that have failed, including the firebox, damper, gas controls, pilot assembly, insert, and the surrounding flue. It’s different from a sweep, which cleans the system rather than repairing it. We handle the full system from the firebox to the crown, so you don’t need to call anyone else. Call (833) 754-6815 to book an inspection.
Simple repairs like a pilot light, thermocouple, or damper usually take one visit of an hour or two. Firebox patching is often a same-day job once the materials are set. Larger repairs like a firebox rebuild or liner restoration can take more than one visit. We give you the expected timeline in the written estimate before you approve anything.
A typical fireplace repair in Port Richmond runs $150 – $700 for pilot, damper, and gas control work, and $400 – $4,500 for masonry repairs, firebox rebuilds, and liner restoration. The final price depends on what’s failed and how much of the system is involved. The written estimate sets the price, and the estimate itself is free. Call (833) 754-6815 for an exact quote.
Yes, we service systems using HeatShield and Olympia Chimney components, along with Gelco and Famco. We’re familiar with how they wear and where they tend to need repair. If you have a different brand, we can still help. The inspection identifies what’s installed and what it needs.
Same-day repair is often possible when the job is straightforward and parts are on hand at the time you call. Dispatch runs Sunday through Friday, 7am to 7pm, and we’re closed on Saturday. We answer 24/7 for booking. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Yes. The materials we install, including HeatShield and Olympia Chimney components, carry the product warranties their makers supply. Our own workmanship is covered by our satisfaction guarantee. If a repair doesn’t perform as it should, we’ll return and correct it. The details are put in writing before the job.
Clear the area around the hearth so the technician can reach the fireplace without moving furniture. Remove any fire screen or tools, and stop using the fireplace for at least a day before the visit so it’s cool. Tell us what brand and model if you know it, and let us know if you’ve noticed smoke, gas smell, or anything unusual. That helps us bring the right parts.
Schedule Your Fireplace Repair Service in Port Richmond Today
If your Port Richmond fireplace is underperforming, the fix is one call away. We handle the full system from firebox to crown, with pro-grade materials and camera evidence you can see. The estimate is free, and the written estimate sets the final price. Call (833) 754-6815. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Port Richmond.