Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Hunting Park
If your chimney cap is rusted through or your crown has a hairline crack running to the flue, we can take a look and tell you what’s actually wrong. Chimney Sweep Port Richmond handles cap and crown work across Hunting Park, from single-flue caps on a two-story rowhouse to custom multi-flue caps that have to seal over a party wall shared with the house next door. We know these blocks. We know what a 1920s brick stack looks like after eighty Philadelphia winters, and we know the shape of the roof work here before we climb. Call (833) 754-6815 for a free estimate. We answer 24/7.
Why Hunting Park Homeowners Call Chimney Sweep Port Richmond for Chimney Cap & Crown
Most of the calls we get from Hunting Park start the same way: another sweep pointed at the chimney top, said it needed work, and left without showing anyone a photo. We do the opposite. The cap and crown job begins with camera evidence you can look at yourself, and nothing gets recommended that the inspection doesn’t support. That approach has earned us a strong local reputation among rowhouse owners on these blocks, and it’s why neighbors pass our number along.
Steve from our team has heard every version of “the last guy said the whole chimney needs to come down.” Our answer is always the same: let’s run the camera first, then talk about what can wait and what can’t. Our technicians have up to 12 years of experience with the old brick and terra cotta stacks common in Hunting Park, and we work in professional-grade materials from HeatShield, Gelco, and Copperfield rather than whatever’s cheapest at the supply house. Fast dispatch runs from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Hunting Park
We handle the full chimney system, from the firebox to the crown. Here’s what that means for the top of the stack in Hunting Park.
Cap Installation
A proper cap keeps rain, birds, and debris out and does it with a purpose-built cover, not a hardware-store improvised lid. In Hunting Park, where chimneys sit shoulder to shoulder above the party walls, we measure carefully before we order anything. Gelco and Famco supply the stock caps we install, and every one is fitted to the actual flue opening.

Cap Replacement
Rusted, dented, or blown-off caps are common after the freeze-thaw winters here. We pull the old one, inspect the flue opening underneath, and fit a replacement built to spec. If your cap was blocking a neighbor’s draft, we’ll sort out the venting on the shared stack while we’re up there.

Crown Repair
The crown is the concrete cap on top of the brick that sheds water away from the flue. When it cracks, water runs down the liner and mixes with creosote. We repair cracked and spalled crowns with proper mortar and slope, and we check the flue tiles underneath before we ever call the job done. A crown repair that skips the liner inspection tends to come back.

Crown Coating
For crowns that are cracked but still structurally sound, a flexible coating seals the surface and gives it years more life without a full tear-out. This is one of the smartest moves in Hunting Park’s climate. We prep the surface, apply the coating, and confirm the crown still sheds in the right direction.
Multi-Flue Cap and Custom Cap
These are the two we build out most often here. A multi-flue cap covers more than one flue opening under a single cover, which is exactly what a rowhouse stack needs when two or three addresses share it. A custom cap is fabricated to fit non-standard openings, including the party-wall gaps that off-the-shelf covers never seal properly. Both get measured on site, and both are built to the actual stack.
Trusted Brands We Service in Hunting Park
We install and work with brands that chimney specialists actually trust: Gelco and Famco for caps, Copperfield for stainless work, and HeatShield for liner restoration when the crown repair reveals a bigger problem underneath. Material traceability matters here. When you know what’s going on the stack, you know what warranty comes with it, and you know what to expect when it needs replacing in fifteen or twenty years. We turn stock cap orders around fast, and custom fabrication is quoted per job with the written estimate setting the final price. If you need cap and crown work, our chimney cap & crown team handles the measurement, the install, and the follow-up inspection.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Hunting Park Homes
These blocks have their own set of failures. Here’s what shows up again and again.
- A neighbor’s new cap blocks your draft. When a cap goes on a shared stack without accounting for the flue next door, smoke back-puffs into the other unit. It’s one of the most common complaints we hear on these blocks, and it’s fixable with a properly fitted multi-flue cover that respects both openings.
- Spalled terra cotta liners under a fresh cap. Decades of freeze-thaw cycles crack the original liners, and a cap installed without inspecting them just traps moisture against the spalling. The cap looks fine; the crown starts cracking a year later. That’s why we run the camera before recommending anything.
- Party-wall gaps that off-the-shelf caps miss. Multi-flue caps fabricated for one address often fail to seal over the party-wall gap between attached rowhouses, which lets cross-contamination between appliance vents become a real risk. Custom fabrication solves this, but only if the person measuring the stack knows what they’re looking at.
- Crowns cracked by the seasonal swing. Hot, humid summers followed by freezing winters work mortar joints loose year after year. On a typical Hunting Park rowhouse, the crown cracks and the joints between flue tiles spall, letting water run down the liner and mix with creosote. A coating or rebuild in the fall often prevents a masonry repair by midwinter.
Pricing for Chimney Cap & Crown in Hunting Park, PA
Here’s what these jobs typically run, so you have a number before you call. A typical single-flue cap installation in Hunting Park runs $150 – $400 depending on the flue size and the cap material. Cap replacement is similar, usually $180 – $425 including the pull-off and the inspection underneath.
Multi-flue and custom caps are a bigger job, and they typically run $400 – $900 in this market because of the on-site measurement, the fabrication, and the party-wall sealing work. Crown repair runs $250 – $750, and crown coating is usually the lighter-touch option at $200 – $500. What pushes a job to the higher end is the condition of the stack underneath: a cracked crown with spalled tiles and a failing liner costs more than one with sound brick and a solid flue. The written estimate sets the final price, and the estimate itself is free.
We Also Serve Cities Near Hunting Park
The same cap and crown work we do in Hunting Park carries over to the neighborhoods just outside it: Logan, Olney, Germantown, and East Falls. Same rowhouse stock, same shared stacks, same freeze-thaw conditions on the masonry. If you’re outside the Hunting Park line, call and we’ll book you into the nearest opening.
Serving Hunting Park, PA – Our Local Coverage Area
We serve Hunting Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Hunting Park
Yes, and we do it regularly. The right cover depends on how the two flues sit relative to the party wall. Sometimes a split cover works, sometimes a custom-fabricated cap that isolates each opening is the safer choice, and sometimes the two units need a single multi-flue cover sized for both. We measure on site, run the camera, and recommend what the stack actually needs. Call (833) 754-6815 for an exact quote. Estimates are free.
A Level 2 camera inspection is the only reliable way to know. The camera shows whether the flues are separated properly, whether the party-wall gap is sealed, and whether smoke or appliance exhaust from one unit can reach the other. Without that inspection, everyone on the stack is guessing. Nothing gets recommended without footage you can see for yourself.
Because the crack is usually the symptom, not the cause. Water is getting in somewhere else, often through spalled flue tiles or a cap that isn’t shedding correctly, and the repaired crown fails again the next time the temperature drops. A flexible coating will hold up better than a mortar patch in this climate, but only after the moisture source is found. Call (833) 754-6815 for an exact quote. Estimates are free.
Through the house, every time. On Hunting Park’s blocks the rear alleys are too narrow for ladder placement, so a qualified local pro carries equipment through to the roof access point, does the work, and carries it back out. It takes planning, drop cloths, and care with your floors. It also means the estimate has to account for the access, not just the cap, which is why we measure on site before quoting.
Yes. A sealed fireplace still has a flue, and an open flue still lets rain, birds, and debris into the stack even when the firebox is closed off. Water entering an unused flue can crack the crown and spall the tiles just as quickly as one in use. On these rowhouses the crown is often the first thing to fail when a flue goes uncapped. Call (833) 754-6815 for an exact quote. Estimates are free.
Written by the team at Chimney Sweep Port Richmond.