Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Kensington
If you live in Kensington, your chimney is probably not a standalone stack out in the yard. It’s a brick column rising through a wall you share with the house next door, and that changes what cap and crown work actually means. Water that gets into a failing crown on your side of the party wall soaks the mortar and clay tile both homes depend on. We handle the full chimney system, from the firebox to the crown, and we know these blocks well. Call (833) 754-6815. We answer 24/7. Fast dispatch from 7am to 7pm.
Why Kensington Homeowners Call Chimney Sweep Port Richmond for Chimney Cap & Crown
Kensington’s rowhouse chimneys are mostly original brick stacks from the late 1800s through the 1920s, with unlined or clay-tile flues that once served coal fireplaces and early gas appliances. Assessing that kind of masonry takes a different eye than capping a newer suburban flue, and it’s the work we do across the neighborhood. Our technicians have up to 12 years of experience, and they read a Kensington stack from the roof and from the neighbor-facing side of the wall, not just the firebox.
We’re a full-service chimney and fireplace specialist, so the same company that sweeps your flue can coat a washed-out crown, cut a multi-flue cap to fit undersized openings, or line a flue that’s cracked beyond patching. No handoff to another contractor. We work with professional-grade materials from brands chimney specialists actually trust, including HeatShield, Gelco, and Olympia Chimney, and we don’t improvise with hardware-store caps on a stack this old. Roof access on a tight Kensington block is its own puzzle, and we plan for it rather than fight it on the day.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Kensington
We cover the whole range of cap and crown work, with a focus on the multi-flue caps, crown repairs, and crown coatings that dominate these older attached homes. Here’s what each involves.
Cap Installation
A properly fitted cap keeps rain, leaves, and squirrels out of an open flue, and on a Kensington rowhouse that matters more than in the suburbs because the roofscape is dense and the flues are often undersized. We size the cap to the actual opening, not a nominal one, so it sits right instead of rattling loose. Gelco and Famco caps give us purpose-engineered options rather than an improvised cover.

Cap Replacement
When an old cap has rusted through or was never sized correctly, it can push downdraft and a neighbor’s appliance exhaust back into your firebox. We pull the failed cap, check the flue opening, and fit a replacement matched to your flue count and dimensions. On shared stacks in Kensington, getting the flue count and spacing right is the difference between a cap that works and one that smokes you out.

Crown Repair
The crown is the concrete or mortar cap on top of the chimney that sheds water away from the brick. Ours wash out fast at the party wall, where meltwater pools and freeze-thaw cycles pry hairline cracks open. We rebuild the crown with the correct slope and overhang so water runs off the stack instead of into it, and we check both sides of a shared wall while we’re up there.

Crown Coating
A crown that’s cracked but structurally sound doesn’t always need a full tear-out. A flexible crown coating seals hairline cracks and gives you several more years before a rebuild, and HeatShield restoration can extend a deteriorating flue without full demolition. For older Kensington brick, keeping the original stack intact and protected is often the better path than replacement.
Trusted Brands We Service in Kensington
We install and work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, and we choose among them based on what your flue actually needs, not whatever’s cheapest at the supply house. DuraFlex flexible liner systems let us line complex or offset flue configurations that rigid-liner-only crews turn away, which happens often on these older Kensington stacks. Gelco and Famco give us engineered caps for a clean fit. HeatShield restoration lets us address structural flue deterioration without a full rebuild. We don’t claim to stock parts locally, but we can usually turn a cap or crown job quickly once we’ve seen the stack. Call for a free estimate.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Kensington Homes
- Crowns washing out at the party wall. Water pools where two attached homes meet, so hairline cracks open on both halves of a shared stack and both units get water into crumbled clay tile. That’s why crown work here is really shared-stack work.
- Spalled brick at the roofline. Philadelphia’s humid summers and freeze-thaw winters break down the soft local brick, which cracks the flashing seal and leaves an open, uncapped flue taking rain and squirrels straight down the stack.
- Off-the-shelf caps on undersized or offset flues. A cap that sits wrong lets downdraft and a neighbor’s appliance exhaust push back into your firebox, so the fire smokes and the smoke chamber smells on humid days.
- Cross-contamination through shared flues. When the chimney passes through a party wall, a cracked flue in one home can leak smoke or carbon monoxide into the attached unit, so we check the full stack from both sides of the wall, not just the visible firebox.
Pricing for Chimney Cap & Crown in Kensington, PA
We price per job, and the written estimate sets the final number. Typical ranges for this kind of work in the Kensington market run roughly $250 to $650 for a single-flue cap installation and $450 to $1,100 for a multi-flue cap sized to an older attached stack, where the flue count and tight spacing drive the work. Crown coating usually runs about $350 to $800, while a full crown repair or rebuild runs $600 to $1,600 depending on the slope correction and how much of the party-wall crown has to come off. Spalling at the roofline can add masonry repair on top of that. We inspect first, show you what we found, and give you the written estimate before anything is booked. Nothing gets recommended that we can’t point to on the roof.
We Also Serve Cities Near Kensington
Along with our work in Kensington, we reach the neighboring communities of Port Richmond, Fishtown, Frankford, and Hunting Park, all of which share the same stock of attached brick rowhouses and the same freeze-thaw wear on crowns and mortar. If you’re in any of them and your chimney shares a wall, the same shared-stack logic applies.
Serving Kensington, PA – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Kensington
Repairing only your half can stop some of the leak, but it won’t fully cure it. Water travels through shared mortar and clay tile, so a proper crown repair addresses the whole visible stack, including the neighbor-facing side of the party wall. We inspect both sides before recommending the scope, then rebuild or coat the crown with correct slope so it sheds water away from both homes.
Older rowhouse stacks often carry more than one flue in a single column, so a single cap leaves the other openings exposed. A multi-flue cap covers every flue at once and keeps rain, leaves, and squirrels out of the whole stack. It also helps with downdraft and prevents a neighbor’s appliance exhaust from pushing back into your firebox.
Spalling means the soft local brick at the top of the stack is breaking down from decades of freeze-thaw and moisture, and that almost always goes with a failing crown above it. When the brick face flakes away, it breaks the flashing seal and lets water into the crown and flue tile. A qualified pro should check the crown, the mortar joints, and the flashing together, since fixing one without the others just moves the leak.
A smell of smoke from a shared stack usually points to a cracked or offset flue that’s letting exhaust cross between units, so it needs a Level 2 inspection of the full stack. We look at the flue tile, the mortar joints, and the parging from both sides of the party wall, because a flue leak in one home can push smoke or carbon monoxide into the attached one. If a flue is compromised, HeatShield restoration or a DuraFlex liner can often seal it without a rebuild.
Yes, because the crown, mortar, and flashing at the roofline weather whether or not you light a fire, and on a shared stack water damage affects both homes. An annual look catches a washed-out crown or spalled brick before it cracks the flue tile. It’s cheaper to keep the crown protected than to rebuild the stack later. Call (833) 754-6815 for a free estimate – we’ll tell you plainly when a repair can safely wait.
If your crown is cracked or your cap has seen better days, get it looked at before the next freeze. Call (833) 754-6815. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We handle the full chimney system for Kensington homeowners – from the firebox to the crown – with a free estimate and a written scope you can actually see on the roof.
Written by the team at Chimney Sweep Port Richmond.