Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Logan
If your cap is missing, cracked, or rusted through, or your crown has a visible crack along the wash, you’re in the right place. A typical chimney cap and crown job in Logan runs $285 – $950 depending on whether we’re replacing a single-flue cap, fitting a multi-flue cap on a shared rowhouse stack, or repairing and coating a crown. We know Logan’s blocks well: the 1920s – 40s brick rowhouses running through ZIP 19141, the interior chimneys that rise through the middle of the block, and the rear alley access those stacks demand. Call (833) 754-6815. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Logan Homeowners Call Chimney Sweep Port Richmond for Chimney Cap & Crown
Logan’s housing stock is specific, and it rewards a specialist. These are dense two- and three-story brick rowhouses, many built between 1920 and 1950, with original interior chimneys that once vented coal, then oil, then gas. The terracotta liners behind those flues have often spalled. The mortar has often softened. Working on them is rowhouse-terrace work, not the detached-house work most cap crews are set up for.
That’s where we come in. We handle the full chimney system, from the firebox to the crown, and we do it with the professional-grade materials chimney specialists actually trust: Gelco and Famco caps that are purpose-engineered for the job, HeatShield for liner restoration where the flue needs attention before it gets a new cap. We don’t list-stuff brands and we don’t carry parts on trucks. We order what the job calls for and return with it when the schedule allows.
The other reason Logan homeowners call us: we don’t recommend work you can’t see the reason for. Every diagnosis comes with camera inspection and a photo report. Nothing gets sold on a hunch.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Logan
We cover six cap-and-crown services across Logan. The four most common below are what most of the calls here come down to.
Cap Installation in Logan
A correctly sized cap is the single cheapest thing you can add to a Logan chimney. It keeps rain, squirrels, and masonry debris out of a flue that was never designed for the appliance now vented into it. We fit Gelco or Famco caps sealed to the masonry, sized to the flue we actually find. On the narrow rear extension stacks common here, the fit matters more than the brand.

Cap Replacement in Logan
Older caps on Logan rowhouses fail in predictable ways: rust-through on the mesh, a top that’s lifted in the wind, or a fit that was never right to begin with. When we replace a cap, we photograph the flue top before we take the old one off, so you see exactly what you’re capping. A typical single-flue replacement in Logan runs $285 – $525.

Crown Repair in Logan
The crown is the concrete wash at the top of the stack that sheds water. On Logan’s shared masonry stacks, hairline cracks here let water track down into the party-wall chimney. Freeze-thaw cycles through Philadelphia’s cold, damp winters widen those cracks every season. Crown repair reseals the wash top before that happens. Multi-flue caps run $650 – $1,150 because the sizing and sealing on a shared stack is real work.

Crown Coating in Logan
When the crown is sound but the surface is rough, a proper coating – primer first, then the coating itself – restores the water-shedding surface without a rebuild. Crown coating in Logan typically runs $425 – $850. The critical detail: the mortar has to be dry and primed. A cheap coating applied over wet, unprimed masonry traps moisture and spalls the brick further. That’s the classic upsell failure on rowhouse crowns, and we’ve seen it on plenty of Logan blocks.
Trusted Brands We Service in Logan
We install and work with Gelco and Famco caps, Olympia Chimney components where the configuration calls for them, and HeatShield where the liner itself needs restoration before a new cap goes on. These are brands chimney specialists actually specify, and they carry the product warranties that generic hardware-store covers don’t. On the original interior chimneys here, the cap has to be matched to the flue, not improvised over it. We don’t stock parts on a truck. We order what the Logan job needs, and we schedule the return once it arrives.
Common Chimney Cap & Crown Problems We See in Logan Homes
Nearly every call we take in Logan traces back to one of four patterns.
- Cracked crown and wash letting water into a spalled clay-tile flue. Hairline cracks on the wash top open further with each freeze-thaw cycle. On a shared party-wall stack, that water shows up as a damp ceiling two doors down – not at the house with the failed crown.
- Missing or ill-fitting caps on flues venting the wrong appliance. An original 1930s flue designed for coal, now venting a gas furnace or water heater, with no cap and a draft that won’t hold. Creosote builds, the draft stalls, and the fix starts at the top of the stack.
- Cheap crown coating applied over wet, unprimed mortar. It looks fine for one season. Then the trapped moisture pushes the coating off and the brick spalls underneath. A coating is only as good as the prep under it.
- Rear extension stacks with no access from the side yard. Logan’s narrow lots mean rear-alley and roof access, and some crews won’t take that work. We will.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Logan, PA
Cap and crown pricing in Logan is set per job by the written estimate. What moves the number: how many flues share the stack, whether the crown needs repair or just coating, whether the existing cap can be reused, and roof access. As a guide:
- Single-flue cap installation: $285 – $525
- Multi-flue cap on a shared stack: $650 – $1,150
- Crown repair: $550 – $1,200
- Crown coating: $425 – $850
- Custom cap for a non-standard stack: quoted per job
Every estimate is free. We inspect with a camera, we show you the photos before we recommend anything, and we tell you plainly what can wait. Nothing gets sold on a guess.
We Also Serve Cities Near Logan
The same rowhouse stock runs straight out of Logan into neighboring blocks, and we cover them: Olney, Oak Lane, Germantown, and Hunting Park. If you’re in one of those, or anywhere in the Logan area, our chimney cap & crown team can take the call. Same camera-first process everywhere.
Serving Logan, PA – Our Local Coverage Area
We serve Logan and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Logan
Yes, often it will. On Logan rowhouse blocks the crown sits on a masonry stack shared at the party wall, so a failed crown on one house can send water down the flue and show up as damp staining on a neighbor’s ceiling two doors down. That’s why cap-and-crown calls here frequently start at the wrong address. The honest answer is that the fix has to start at the source: the crown. A camera inspection will confirm whether that source is your stack or the neighbor’s before anyone commits to work. Call (833) 754-6815 for a free estimate.
Yes, cap and crown come first, and the flue gets assessed at the same time. The original clay-tile flues on these Logan homes were built for coal and have often spalled. An uncapped flue lets in everything that accelerates the breakdown. A properly sized cap and a sealed crown stop the water intrusion while we assess the flue interior on camera. If the liner has failed, that’s a separate conversation with photos in front of you, not a sales pitch. Call for a free estimate.
You see the camera evidence before we recommend anything. That’s the rule on every Logan job we do. The technician shows you the flue interior and the crown surface on inspection, points at the specific crack or spall, and puts the photos in a written report. If the crown is sound and can safely wait a season, we say so. Logan’s rowhouse crowns are exactly where the industry’s worst upselling happens, and the only defense is homeowner-visible evidence. Call (833) 754-6815.
Sometimes, and sometimes not. Rear extension stacks on Logan’s narrow rowhouse lots often have odd flue sizes or a masonry top that doesn’t sit square, and a standard cap that doesn’t fit correctly leaks. That’s where a custom cap earns its price. We measure the flue opening and the masonry top before we order anything, whether it’s a Gelco or Famco standard or a custom build. Call for a free estimate and we’ll tell you which applies.
Yes. NFPA 211 recommends an annual chimney inspection regardless of how often you burn. On Logan’s older chimneys, the inspection isn’t just about creosote. It’s the check that catches a hairline crown crack or a spalled flue before it becomes a frozen break or a leak into the party-wall stack. An annual camera check is cheaper than a crown repair, every time. Call (833) 754-6815 to schedule yours. Estimates are free.
Book a Cap and Crown Inspection in Logan
If your crown is showing its age, your cap is missing or rusted, or a neighbor’s damp ceiling is making you wonder about your own stack, call (833) 754-6815 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll bring the camera, show you what’s actually going on at the top of your Logan chimney, and recommend only what the evidence supports. The written estimate sets the final price.
Written by the team at Chimney Sweep Port Richmond.