Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Tacony
Tacony’s rowhouses were built tight, and their chimney stacks were built to be shared. If you’re seeing water stains near the chimney, flakes of mortar on the roof, or a cap that’s rusted through, we handle the cap and crown work that keeps rain out of old brick. We know these blocks along Torresdale Avenue and the numbered side streets, and we know what a 1920s party-wall stack needs. Our technicians have up to 12 years of experience with exactly this housing stock. Call (833) 754-6815. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Tacony Homeowners Call Chimney Sweep Port Richmond for Chimney Cap & Crown
Most cap jobs in Tacony aren’t simple. A brick stack here often serves two or three attached addresses through party-wall flues, so what we’re looking at on your roof is a shared structure, not just yours. We bring the tools to read that correctly: a Level 2 camera inspection and a photo report you keep, so you can see the flue condition behind the crown before anyone recommends a fix.
We also work with the brands that hold up on this housing stock. Gelco and Famco caps are purpose-engineered for multi-flue stacks. Olympia Chimney components cover odd configurations that a hardware-store cover can’t. HeatShield liner restoration lets us address a flaking terra-cotta flue without a full tear-out. When we quote a crown repair or a cap replacement, the written estimate sets the price and it’s agreed before we start.
That’s what makes a Tacony customer call back. Not a pitch, just the camera evidence and a straight answer about what can wait.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Tacony
We handle the full chimney system, from the firebox to the crown. On Tacony’s rowhouse blocks the crown and cap end of that system does more work than most people realize. Here’s what we install and repair.
Cap Installation
A new cap on a Tacony rowhouse has to fit the flue it actually covers, not the flue someone assumed was there. We size caps to each flue opening and to the draft the appliance needs. On a shared stack that means getting the sizing right for every appliance venting through it, not just yours.

Cap Replacement
We replace rusted, missing, or undersized caps, including single-flue covers that got fitted over a multi-flue Tacony stack and left a neighboring flue open to rain and birds. Gelco and Famco supply gives us proper replacement options. If the old cap was improvised, we’ll say so.

Crown Repair
Original brick-and-mortar crowns on Tacony’s 1880s – 1930s stacks crack and spall under freeze-thaw, and a cracked crown lets water run straight down a shared party-wall flue. We repair crowns with a cast or coated finish and a drip edge so water sheds off the stack instead of into the masonry.

Crown Coating
Where the crown is sound but porous, a proper coating seals it without a rebuild. On Tacony’s densely packed rowhouses the crown is often the only barrier between humid air off the Delaware frontage and an unlined or flaking terra-cotta flue. Coating buys years before more masonry work is needed.
Trusted Brands We Service in Tacony
We work with professional-grade brands that chimney specialists actually trust: HeatShield, Gelco, Olympia Chimney, and Famco for caps and crown materials. We don’t stock parts locally. We assess what the stack needs, order the right component, and get it installed. That means a properly sized Gelco or Famco cap for a multi-flue Tacony stack, or an Olympia Chimney piece for an odd configuration, rather than whatever’s cheapest at the supply house. The product carries its own warranty, and you get the traceability that comes with a name-brand part.
Common Chimney Cap & Crown Problems We See in Tacony Homes
These come up again and again on the mill-village blocks, and they’re specific to this housing stock rather than the newer subdivisions further north.
- Cracked coal-era crowns on shared stacks. The original brick-and-mortar crowns on 1880s – 1930s rowhouses crack and spall under freeze-thaw. When the stack is shared, water running down a party-wall flue reaches a neighbor’s appliance too.
- Single caps over multi-flue stacks. A cap sized for one appliance gets fitted over a stack serving two or three addresses, leaving a neighboring flue exposed to rain, birds, and downdraft.
- Oil-to-gas conversions with a flaking liner under a new cap. Old converted flues carry creosote history and a flaking terra-cotta liner. A new cap can seal moisture in unless the liner and crown are assessed first.
- Abandoned and re-routed flues from rear additions. Many Tacony rowhouses had rear additions where flues were re-routed or abandoned. An unconsidered flue opening under a new crown is a leak waiting to happen.
Pricing for Chimney Cap & Crown in Tacony, PA
Here’s what this work typically runs in Tacony’s market. A standard single-flue cap installation runs about $185 – $375. A multi-flue or custom cap for a shared Tacony stack runs $350 – $800, depending on the number of flues and the configuration. Crown repair runs $350 – $750. Crown coating runs $300 – $600. Those ranges reflect the extra care a shared party-wall stack needs: more flues, more inspection, more evidence before the cap goes back on. The written estimate sets the final price, and the estimate is free. We can also work with your insurer if a repair is tied to a claim.
The one question worth asking before you commit: is the work shown to you on camera? Ours is. Nothing gets recommended here without photo evidence you can see for yourself. If some of the work can safely wait until spring, we’ll tell you.
See the difference
Before
After
Before
After
Before
AfterA Typical Cap and Crown Job on a Tacony Rowhouse
Most jobs start with a homeowner noticing water staining on the ceiling near the chimney, or flakes of mortar on the roof. A technician finds the original brick-and-mortar crown cracked and porous, with a rusted or missing cap letting rain straight into an unlined flue. On a shared Tacony stack, the same cracked crown can be shedding water into a party-wall flue that a neighbor’s furnace also vents into. The usual fix is a proper cast or coated crown with a drip edge, a correctly sized multi-flue or custom cap over each flue, and a Level 2 inspection to confirm the flue liner and smoke chamber are still sound before the cap goes back on. That shared-structure reality is the real variable on Tacony blocks, and it’s why a cap decision here is often a conversation between neighbors.
We Also Serve Cities Near Tacony
We work cap and crown jobs across the surrounding Northeast Philadelphia neighborhoods. That includes Mayfair, Oxford Circle, Frankford, and Olney, and of course Tacony itself. If your rowhouse sits on a shared stack in any of these areas, the same advice applies: get the flues assessed before the cap goes on. Call for a Tacony-area estimate.
Serving Tacony, PA – Our Local Coverage Area
We serve Tacony and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Tacony
We handle the shared stack as one structure, and we’ll document both flues with a camera inspection so you and your neighbor can see what’s happening together. On a party-wall stack, a cap or crown decision affects the shared masonry above both rowhouses, so it helps to have both sides looking at the same photo report. Call (833) 754-6815 to set up an inspection and free estimate.
Not always, but it has to be checked first. Tacony’s 1880s – 1930s stacks were built for coal and often converted to gas or oil, which leaves flaking terra-cotta liners and creosote history. A new cap over a failing liner seals moisture in. Our Level 2 inspection confirms the liner and smoke chamber condition before any cap goes back on, and HeatShield restoration can address a flaking flue without a full rebuild. Call for an exact quote; estimates are free.
The flakes are usually coming off a cracked, spalling crown. Freeze-thaw winters stress old brick and mortar on these rowhouse stacks, and the crown breaks down first. That’s a real signal, not cosmetic: once the crown is porous, water gets into the masonry and down the flue. Call (833) 754-6815 and we’ll inspect and give you a written estimate for crown repair or coating.
Sometimes it helps, but a cap alone won’t fix a shared-stack draft problem. When two flues share a party-wall stack, appliance exhaust can migrate between them if a flue is open, undersized, or capped wrong. We inspect both flues and size a proper multi-flue cap over the whole stack. That, plus correcting the liner or draft issue, is the real fix. Call for an inspection and free estimate.
Because the appliance heating your Tacony rowhouse still vents through that chimney, and the crown and cap are its only defense against water. Humid summers and freeze-thaw winters work on old brick and mortar, and a crown crack or a rusted cap can open a path for moisture into an unlined or terra-cotta flue. A yearly inspection catches that early. Call (833) 754-6815 for a free estimate.
Book Your Chimney Cap & Crown Estimate in Tacony
If your cap is rusted, your crown is cracking, or a shared stack is sending water into the masonry, get it assessed before the next freeze. We handle the full chimney system, from the firebox to the crown, with professional-grade materials from brands chimney specialists actually trust. Nothing gets recommended without camera evidence you can see yourself. Call (833) 754-6815 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Port Richmond.