Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Sweep for Port Richmond Homeowners
Most chimney problems in Port Richmond announce themselves quietly: a faint creosote smell on a damp day, a draft that wasn’t there last winter, a thin line of staining on the firebox brick. Our job is to find the cause before it turns into a rebuild. Chimney Sweep Port Richmond is a full-service chimney and fireplace specialist, so the technician who sweeps your flue is the same one who can read the crown, check the cap, and tell you plainly whether the liner has years left or months. You get the whole system looked at, not just the box emptied. Our technicians have up to 12 years of experience, and we connect you with local professionals who perform the work to a professional standard. We answer 24/7 at (833) 754-6815. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday.
What Our Chimney Sweep Service Includes
A sweep is only useful if it comes with an honest assessment. Every visit through Chimney Sweep Port Richmond covers cleaning and inspection together, so nothing gets flagged without evidence you can see for yourself.
Level 1 Inspection
A Level 1 inspection is a visual check of the accessible parts of your chimney, flue and firebox, done alongside a routine sweep. You need one when the appliance is unchanged, the chimney is in regular use, and nothing has shifted since the last visit. We check the firebox, damper, flue interior, cap and crown, then note what we find in plain language so you know what’s healthy and what to watch.

Level 2 Inspection
A Level 2 inspection goes further, using a camera to look through the full length of the flue. It’s the right call after a chimney fire, a change of appliance, a flue liner replacement, or a property sale, when you need to know the real condition of the interior. We run the camera and share the footage with you as part of the report, so any recommendation to reline or repair is backed by something you’ve actually seen.

Creosote Removal
Creosote builds up in layers, and the glazed, hardened stage is the one that matters most for fire risk. It’s why a flue that was swept two seasons ago can still need attention now, especially with a wood stove run low and slow. We remove creosote with professional rotary and hand tools matched to the flue’s condition, and we tell you honestly when buildup is light enough that a standard sweep handles it.

Soot Removal
Soot is the fine, powdery residue that collects on the smoke shelf, damper and firebox walls, and it’s easy to miss on a quick pass. Left in place, it stains surrounding surfaces and clouds the firebox. We clean the full firebox and smoke chamber with drop cloths and sealed equipment in place, so the soot leaves your home rather than settling on the rug.
Annual Sweep
An annual sweep keeps a working chimney predictable. It’s the visit where creosote gets removed, the flue gets inspected, and small issues like a cracked crown or a loose cap get caught before they cost real money. We work from a written estimate agreed before we book, so the price doesn’t shift when the technician arrives. If it’s been more than a year, it’s worth booking.
Fireplace Cleaning
Fireplace cleaning covers the masonry, firebox, hearth and glass, not just the flue. It’s what you want after heavy use, or before selling, when the fireplace needs to look as sound as it is. We clean the firebox and surrounding surfaces and check the firebrick and mortar while we’re there, so the fireplace is safe to use and looks it. Pair it with our chimney repair service if the masonry needs work.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Sweep
We work with professional-grade materials from brands chimney specialists actually trust, and we service equipment built with those same systems in mind. HeatShield is one we know well: the liner restoration application lets us resurface a deteriorated flue without a full demolition, and reading its condition tells us whether an existing HeatShield liner needs attention or is holding up. Olympia Chimney liners appear in a lot of older Port Richmond homes, and we know how their flexible and rigid configurations wear at the seams and connections.
Gelco and Famco caps are the ones we prefer for replacements, because a purpose-engineered cap fits and vents the way it should, unlike a hardware-store improvisation. We also install DuraFlex flexible liner systems, which lets us line non-standard flue configurations that rigid-only crews tend to turn away. Whether your system was built with one of these or any other make, we can help you get it swept, inspected and repaired properly.
Signs You Need Chimney Sweep Right Now
- A strong smoky smell on damp days. This usually means creosote has built up and is drawing moisture into the flue, and it will only get heavier until it’s removed. A sweep clears it and tells you whether the buildup is glazed or ordinary.
- Staining or crumbling around the crown. A cracked crown lets water into the masonry, which then freezes and splits in cold weather. We check it during every sweep so it’s caught before the repair turns into a rebuild.
- Poor draft or smoke spilling into the room. Smoke backing up can point to a blockage, a damaged flue liner, or a cap that’s no longer venting properly. It’s a sign to have the flue looked at rather than to keep burning and hope.
- Animals or nesting debris in the flue. Birds and squirrels get in through a missing or damaged cap, and the debris they leave blocks the flue. A proper Gelco or Famco cap prevents a repeat, and we handle both the cleaning and the cap replacement.
- It’s been more than a year since the last sweep. Creosote accumulates with every fire, and a season’s worth of use adds up quietly. An annual sweep catches that buildup and any small issue before it grows into something costly.
Our Chimney Sweep Process – Step by Step
- 1
We start with a conversation and a walkthrough. We ask when the chimney was last serviced, what you burn, and whether you’ve noticed smells, drafts or stains. That tells us a lot before we’ve touched a tool, so the visit is focused on what’s actually happening in your home.
- 2
We set up and protect the room. Drop cloths go down, the firebox is sealed, and our equipment is connected so ash and soot stay contained. This is the part that separates a real sweep from a quick brush-and-go, and it’s why your floors stay clean.
- 3
We clean the full flue and firebox. The flue, smoke chamber, firebox and damper all get cleaned with tools matched to the flue’s condition. We work from the full system down, so nothing gets skipped in the name of speed.
- 4
We inspect with a camera where it matters. For a Level 2 visit, or when anything looks off, we run a camera through the flue and capture stills. You get to see the liner, the joints and the crown for yourself, so no recommendation comes without photo evidence.
- 5
We report back in plain language. You hear what’s healthy, what can safely wait, and what genuinely needs fixing now. If work is needed, we give you a written estimate that sets the price, and there’s no pressure to agree to it on the spot.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Sweep Cost in Port Richmond?
A typical routine chimney sweep in Port Richmond runs $150 – $300 depending on the flue’s condition and how much creosote has built up. A Level 2 inspection with camera work generally lands in the $250 – $450 range, and combining the sweep with inspection often brings the total down compared with booking them separately. Fireplace cleaning is usually in the $150 – $350 range, and creosote removal on a heavily glazed flue can run higher.
What affects the price most is the flue’s configuration (a long, offset or older chimney takes more time than a straightforward one) and the amount of buildup. To avoid overpaying, ask for a written estimate before any work is booked, and ask whether a camera inspection is included rather than charged as an extra. That’s the whole point of our free estimate: you see what’s going to happen and what it costs before you commit. Nothing is recommended without camera evidence you can view for yourself, and we say plainly when work can safely wait. Call (833) 754-6815 for an exact quote, estimates are free.
Chimney Sweep Near Port Richmond – Our Service Area
We serve Port Richmond and the surrounding neighborhoods, including Kensington, Fishtown, Frankford, Hunting Park, Northern Liberties, Olney, Logan, Fairmount, Tacony, Oxford Circle and East Falls. Response times depend on where in the city you are and the time of year, and we’ll give you a clear booking window when you call. If you’re outside the immediate area, a chimney sweep nearby is easily arranged. Wherever you are across the area, we’re happy to help.
Serving Port Richmond, PA – Our Local Coverage Area
We serve Port Richmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Sweep in Port Richmond
A chimney sweep is the cleaning of your flue and firebox to remove creosote, soot and debris, followed by an inspection of the full system. It covers the firebox, damper, flue, cap and crown, not just the visible interior. At Chimney Sweep Port Richmond, the sweep always comes with an honest assessment of what we find, so you get a clean chimney and a clear picture of its condition. Call (833) 754-6815 to book one.
A standard sweep usually takes about 45 minutes to an hour, and a Level 2 inspection with camera work adds roughly another 30 to 45 minutes. Longer or offset flues, or heavy creosote buildup, can stretch that slightly. We’ll tell you what to expect when you book so you can plan your day.
A routine sweep in Port Richmond typically runs $150 – $300, with a Level 2 inspection around $250 – $450. The final price depends on flue configuration and how much creosote needs removing, and the written estimate sets it before we begin. Call (833) 754-6815 for an exact quote, estimates are free.
Yes. We work with HeatShield liner restoration and Olympia Chimney liners, and we can inspect, sweep and repair systems built with both. The same goes for Gelco and Famco caps and DuraFlex flexible liner systems. If you’re not sure what’s in your chimney, that’s fine: we identify it during the inspection.
Yes, same-day service is often possible depending on the day’s bookings. Call (833) 754-6815. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
Work we perform is backed by a satisfaction guarantee, and products we install carry the manufacturer’s own warranty where one applies. Because we work with professional-grade brands, you get material traceability you won’t get from a sweep-only service. We’ll walk you through the specific coverage for your job during the estimate.
Move any furniture or rugs back from the hearth, clear the fireplace opening, and make sure we can reach it easily. If you have a wood stove or insert, let us know when you book so we bring the right tools. Beyond that, there’s nothing to do: we set up the drop cloths and contain the dust ourselves.
Schedule Your Chimney Sweep Service in Port Richmond Today
If your flue hasn’t been swept this year, or something about your fireplace has been nagging at you, get it looked at properly. Chimney Sweep Port Richmond handles the full chimney system, from the firebox to the crown, with a free, no-obligation estimate and a flat price agreed before we book. Call (833) 754-6815. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday.
Written by the team at Chimney Sweep Port Richmond.